Routing

The routing system in CFWheels encourages a conventional RESTful and resourceful style of request handling.

The CFWheels routing system inspects a request's HTTP verb and URL and decides which controller and action to run.

Consider the following request:

HTTP

GET /products/5

The routing system may match the request to a route like this, which tells CFWheels to load the show action on the Products controller:

.get(name="product", pattern="products/[key]", to="products##show")

Configuring Routes

To configure routes, open the file at config/routes.cfm.

The CFWheels router begins with a call to mapper(), various methods chained from that, and lastly ends with a call to end().

In many cases, if you need to know where to go in the code to work with existing functionality in an application, the routes.cfm file can be a handy map, telling you which controller and action to start looking in.

How Routes Work

The various route mapping methods that we'll introduce in this chapter basically set up a list of routes, matching URL paths to a controllers and actions within your application.

The terminology goes like this:

Name

A route name is set up for reference in your CFML code for building links, forms, and such. To build URLs, you'll use this name along with helpers like linkTo(), startFormTag(), urlFor(), and so on.

Method

A HTTP request method must be defined: GET, POST, PATCH, or DELETE.

You typically want to require POST, PATCH, or DELETE when a given action changes the state of your application's data:

• Creating record(s): POST

• Updating record(s): PATCH

• Deleting record(s): DELETE

You can permit listing and showing records behind a normal HTTP GET request method.

Pattern and Parameters

A pattern is a URL path, sometimes with parameters in [squareBrackets]. Parameter values get sent to the controller in the params struct.

You'll see patterns like these in routes:

Example Route Patterns

posts/[key]/[slug]
posts/[key]
posts

In this example, key and slug are parameters that must be present in the URL for the first route to match, and they are required when linking to the route. In the controller, these parameters will be available at params.key and params.slug, respectively.

When a request is made to CFWheels, the router will look for the first route that matches the requested URL. As an example, this means that if key is present in the URL but not slug, then it's the second route above that will match.

Please note that . is treated as a special characters in patterns and should generally not be used (one exception being when you are responding with multiple formats). If your parameters may have . in their value, please use the long form URL format: /?controller=[controller_name]&action=[action_name]&[parameter_name]=[parameter_value]

Viewing a List of Routes

In the debugging footer, you'll see a View Routes link next to your application's name:

[Reload, View Routes, Run Tests, View Tests]

Clicking that will load a filterable list of routes drawn in the config/routes.cfm file, including name, method, pattern, controller, and action.

If you don't see debugging information at the bottom of the page, see the docs for the showDebugInformation setting in the Configuration and Defaults chapter.

Resource Routing

Many parts of your application will likely be CRUD-based (create, read, update, delete) for specific types of records (users, products, categories). Resources allow you to define a conventional routing structure for this common use case.

Resources are important

You'll want to pay close attention to how resource-based routing works because this is considered an important convention in CFWheels applications.

If we have a products table and want to have a section of our application for managing the products, we can set up the routes using the resources() method like this in config/routes.cfm:

/config/routes.cfm

mapper()
    .resources("products")
.end();

This will set up the following routes, pointing to specific actions within the products controller:

Name	HTTP Verb	Path	Controller & Action	Description
products	GET	/products	products.index	Display a list of all products
product	GET	/products/[key]	products.show	Display a specific product
newProduct	GET	/products/new	products.new	Display a form for creating a new product
products	POST	/products	products.create	Create a new product record
editProduct	GET	/products/[key]/edit	products.edit	Display a form for editing an existing product
product	PATCH/PUT	/products/[key]	products.update	Update an existing product record
product	DELETE	/products/[key]	products.delete	Delete an existing product record

Because the router uses a combination of HTTP verb and path, we only need 4 different URL paths to connect to 7 different actions on the controller.

Whats with the PUT?

There has been some confusion in the web community on whether requests to update data should happen along with a PUT or PATCH HTTP verb. It has been settled mostly that PATCH is the way to go for most situations. CFWheels resources set up both PUT and PATCH to address this confusion, but you should probably prefer linking up PATCH when you are able.

Singular Resources

Standard resources using the resources() method assume that there is a primary key associated with the resource. (Notice the [key] placeholder in the paths listed above in the Strongly Encouraged: Resource Routing section.)

CFWheels also provides a singular resource for routing that will not expose a primary key through the URL.

mapper()
    .resource("cart")
.end();

This is handy especially when you're manipulating records related directly to the user's session (e.g., a profile or a cart can be managed by the user without exposing the primary key of the underlying database records).

Calling resource() (notice that there's no "s" on the end) then exposes the following routes:

Name	HTTP Verb	Path	Controller & Action	Description
cart	GET	/cart	carts.show	Display the cart
newCart	GET	/cart/new	carts.new	Display a form for creating a new cart
cart	POST	/cart	carts.create	Create a new cart record
editCart	GET	/cart/edit	carts.edit	Display a form for editing the cart
cart	PATCH/PUT	/cart	carts.update	Update the cart record
cart	DELETE	/cart	carts.delete	Delete the cart

Note that even though the resource path is singular, the name of the controller is plural by convention.

Also, this example is slightly contrived because it doesn't make much sense to create a "new" cart as a user typically just has one and only one cart tied to their session.

Defining Individual URL Endpoints

As you've seen, defining a resource creates several routes for you automatically, and it is great for setting up groupings of routes for managing resources within your application.

But sometimes you just need to define a single one-off route pattern. For this case, you have a method for each HTTP verb: get(), post(), patch(), put(), and delete().

As a refresher, these are the intended purpose for each HTTP verb:

HTTP Verb	Meaning
GET	Display a list or record
POST	Create a record
PATCH/PUT	Update a record or set of records
DELETE	Delete a record

Security Warning

We strongly recommend that you not allow any GET requests to modify resources in your database (i.e., creating, updating, or deleting records). Always require POST, PUT, PATCH, or DELETE verbs for those sorts of routing endpoints.

Consider a few examples:

config/routes.cfm

mapper()
    .patch(name="heartbeat", to="sessions##update")

    .patch(
        name="usersActivate",
        pattern="users/[userKey]/activations",
        to="activations##update"
    )

    .resources("users")

    .get(name="privacy", controller="pages", action="privacy")
    .get(name="dashboard", controller="dashboards", action="show")
.end();

Rather than creating a whole resource for simple one-off actions or pages, you can create individual endpoints for them.

Notice that you can use the to="controller##action" or use separate controller/action arguments. The toargument allows you to delineate controller and action within a single string using a # separator (which must be escaped as a double ## because of CFML's special usage of that symbol within string syntax).

In fact, you could mock a users resource using these methods like so (though obviously there is little practical reason for doing so):

config/routes.cfm

mapper()
    // The following is roughly equivalent to .resources("users")
    .get(name="newUser", pattern="users/new", to="users##new")
    .get(name="editUser", pattern="users/[key]/edit", to="users##edit")
    .get(name="user", pattern="users/[key]", to="users##show")
    .patch(name="user", pattern="users/[key]", to="users##update")
    .put(name="user", pattern="users/[key]", to="users##update")
    .delete(name="user", pattern="users/[key]", to="users##delete")
    .post(name="users", to="users##create")
    .get(name="users", to="users##index")
.end();

If you need to limit the actions that are exposed by resources() and resource(), you can also pass in only or exceptarguments:

config/routes.cfm

mapper()
    // Only offer endpoints for cart show, update, and delete:
    // -  GET /cart
    // -  PATCH /cart
    // -  DELETE /cart
    .resource(name="cart", only="show,update,delete")

    // Offer all endpoints for wishlists, except for delete:
    // -  GET /wishlists
    // -  GET /wishlists/new
    // -  GET /wishlists/[key]
    // -  GET /wishlists/[key]/edit
    // -  POST /wishlists
    // -  PATCH /wishlists/[key]
    .resources(name="wishlists", except="delete")
.end();

Browser Support for PUT, PATCH, and DELETE

While web standards advocate for usage of these specific HTTP verbs for requests, web browsers don't do a particularly good job of supporting verbs other than GET or POST.

To get around this, the CFWheels router recognizes the specialized verbs from browsers (PUT, PATCH, and DELETE) in this way:

• Via a POST request with a

• POST variable named _method specifying the specific HTTP verb (e.g., _method=delete)

See the chapter on Linking Pages for strategies for working with this constraint.

Note that using CFWheels to write a REST API doesn't typically have this constraint. You should confidently require API clients to use the specific verbs like PATCH and DELETE.

Namespaces

The CFWheels router allows for namespaces: the ability to add a route to a "subfolder" in the URL as well as within the controllers folder of your application.

Let's say that we want to have an "admin" section of the application that is separate from other "public" sections. We'd want for all of the "admin" controllers to be within an admin subfolder both in the URL and our application.

That's what the namespace() method is for:

mapper()
    .namespace("admin")
        .resources("products")
    .end()
.end();

In this example, we have an admin section that will allow the user to manage products. The URL would expose the products section at /admin/products, and the controller would be stored at controllers/admin/Products.cfc.

Packages

Let's say that you want to group a set of controllers together in a subfolder (aka package) in your application but don't want to affect a URL. You can do so using the package mapper method:

mapper()
    .package("public")
        .resources("articles")
        .resource("profile")
    .end()
.end();

With this setup, end users will see /articles and /profile in the URL, but the controllers will be located at controllers/public/Articles.cfc and controllers/public/Profiles.cfc, respectively.

Nested Resources

You'll often find yourself implementing a UI where you need to manipulate data scoped to a parent record. Creating nested resources allows you to reflect this nesting relationship in the URL.

Let's consider an example where we want to enable CRUD for a customer and its children appointment records.

In this situation, we'd perhaps want for our URL to look like this for editing a specific customer's appointment:

HTTP

GET /customers/489/appointments/1909/edit

To code up this nested resource, we'd write this code in config/routes.cfm:

mapper()
    .resources(name="customers", nested=true)
        .resources("appointments")
    .end()
.end();

That will create the following routes:

	HTTP Verb	Path	Controller & Action	Description
newCustomerAppointment	GET	/customers/[customerKey]/appointments/new	appointments.new	Display a form for creating a new appointment for a specific customer
customerAppointment	GET	/customers/[customerKey]/appointments/[key]	appointments.show	Display an existing appointment for a specific customer
editCustomerAppointment	GET	/customers/[customerKey]/appointments/[key]/edit	appointments.edit	Display a form for editing an existing appointment for a specific customer
customerAppointment	PATCH/PUT	/customers/[customerKey]/appointments/[key]	appointments.update	Update an existing appointment record for a specific customer
customerAppointment	DELETE	/customers/[customerKey]/appointments/[key]	appointments.delete	Delete an existing appointment record for an specific customer
customerAppointments	GET	/customers/[customerKey]/appointments	appointments.index	List appointments for a specific customer
customerAppointments	POST	/customers/[customerKey]/appointments	appointments.create	Create an appointment record for a specific customer
newCustomer	GET	/customers/new	customers.new	Display a form for creating a customer
customer	GET	/customers/[key]	customers.show	Display an existing customer
editCustomer	GET	/customers/[key]/edit	customers.edit	Display a form for editing an existing customer
customer	PATCH/PUT	/customers/[key]	customers.update	Update an existing customer
customer	DELETE	/customers/[key]	customers.delete	Delete an existing customer
customers	GET	/customers	customers.index	Display a list of all customers
customers	POST	/customers	customers.create	Create a customer

Notice that the routes for the appointments resource contain a parameter named customerKey. The parent resource's ID will always be represented by its name appended with Key. The child will retain the standard key ID.

You can nest resources and routes as deep as you want, though we recommend considering making the nesting shallower after you get to a few levels deep.

Here's an example of how nesting can be used with different route mapping methods:

mapper()
    // /products/[key]
    .resources(name="products", nested=true)
        // /products/[productKey]/promote
        .patch(name="promote", to="promotions##create")
        // /products/[productKey]/expire
        .delete(name="expire", to="expirations##create")

        // A 2nd-level resource
        // /products/[productKey]/variations/[key]
        .resources(name="variations", nested=true)
            // A 3rd-level resource
            // /products/[productKey]/variations/[variationKey]/primary
            .resource("primary")
        .end()
    .end()
.end();

Wildcard Routes

CFWheels 1.x had a default routing pattern: [controller]/[action]/[key]. The convention for URLs was as follows:

HTTP

GET /news/show/5

With this convention, the URL above told CFWheels to invoke the show action in the news controller. It also passed a parameter called key to the action, with a value of 5.

If you're upgrading from 1.x or still prefer this style of routing for your CFWheels 2+ application, you can use the wildcard() method to enable it part of it:

mapper()
    .wildcard()
.end();

CFWheels 2 will only generate routes for [controller]/[action], however, because resources and the other routing methods are more appropriate for working with records identified by primary keys.

Here is a sample of the patterns that wildcard generates:

/news/new
/news/create
/news/index
/news

The wildcard method by default will only generate routes for the GET request method. If you would like to enable other request methods on the wildcard, you can pass in the method or methods argument:

mapper()
    .wildcard(methods="get,post")
.end();

Security Warning

Specifying a method argument to wildcard with anything other than get gives you the potential to accidentally expose a route that could change data in your application with a GET request. This opens your application to Cross Site Request Forgery (CSRF) vulnerabilities.

wildcard is provided for convenience. Once you're comfortable with routing concepts in CFWheels, we strongly recommend that you use resources (resources, resource) and the other verb-based helpers (get, post, patch, put, and delete) listed above instead.

Order of Precedence

CFWheels gives precedence to the first listed custom route in your config/routes.cfm file.

Consider this example to demonstrate when this can create unexpected issues:

mapper()
    .resources("users")

    .get(
        name="usersPromoted",
        pattern="users/promoted",
        to="userPromotions##index"
    )
.end();

In this case, when the user visits /users/promoted, this will load the show action of the users controller because that was the first pattern that was matched by the CFWheels router.

To fix this, you need the more specific route listed first, leaving the dynamic routing to pick up the less specific pattern:

mapper()
    .get(
        name="usersPromoted",
        pattern="users/promoted",
        to="userPromotions##index"
    )

    .resources("users")
.end();

Making a Catch-All Route

Sometimes you need a catch-all route in CFWheels to support highly dynamic websites (like a content management system, for example), where all requests that are not matched by an existing route get passed to a controller/action that can deal with it.

Let's say you want to have both /welcome-to-the-site and /terms-of-use handled by the same controller and action. Here's what you can do to achieve this.

First, add a new route to config/routes.cfm that catches all pages like this:

mapper()
    .get(name="page", pattern="[title]", to="pages##show")
.end();

Now when you access /welcome-to-the-site, this route will be triggered and the show action will be called on the pages controller with params.title set to welcome-to-the-site.

The problem with this is that this will break any of your normal controllers though, so you'll need to add them specifically before this route. (Remember the order of precedence explained above.)

You'll end up with a config/routes.cfm file looking something like this:

mapper()
    .resources("products")
    .get(name="logout", to="sessions#delete")
    .get(name="page", pattern="[title]", to="pages##show")
    .root(to="dashboards##show")
.end();

products and sessions are your normal controllers. By adding them to the top of the routes file, CFWheels looks for them first. But your catch-all route is more specific than the site root (/), so your catch-all should be listed before the call to root().

Constraints

The constraints feature can be added either at an argument level directly into a resources() or other individual route call, or can be added as a chained function in it's own right. Constraints allow you to add regex to a route matching pattern, so you could for instance, have /users/1/ and /users/bob/ go to different controller actions.

mapper()
   // users/1234
  .resources(name = "users", constraints = { key = "\d+" })
   // users/abc123
  .resources(name = "users", constraints = { key = "\w+\d+" })
.end();

Constraints can also be used as a wrapping function:

mapper()
    .constraints( key = "\d+")
        .resources("users")
        .resources("cats")
        .resources("dogs")
    .end()
.end()

In this example, the key argument being made of digits only will apply to all the nested resources

Wildcard Segments

Wildcard segments allow for wildcards to be used at any point in the URL pattern.

mapper()
  // Match /user/anything/you/want
  .get(name="user/*[username]", to="users##search")
  // Match /user/anything/you/want/search/
  .get(name="user/*[username]/search", to="users##search")
.end()

In the above example, anything/you/want you gets set to the params.username including the /'s. The second example would require /search/ to be on the end of the URL

Shallow Resources

If you have a nested resource where you want to enforce the presence of the parent resource, but only on creation of that resource, then shallow routes can give you a bit of a short cut. An example might be Blog Articles, which have Comments. If we're thinking in terms of our models, let's say that Articles Have Many Comments.

mapper()
    .resources(name="articles", nested=true, shallow=true)
        .resources("comments")
        .resources("quotes")
        .resources("drafts")
    .end()
.end()

Without shallow routes, this block would create RESTful actions for all the nested resources, for example /articles/[articleKey]/comments/[key]

With Shallow resources, we can automatically put the index, create and new RESTful actions with the ArticleKey in the URL, but then separate out edit, show, update and delete actions into their own, and simpler URL path; When we edit or update a comment, we're doing it on that object as it's own entity, and the relationship to the parent article already exists.

So in this case, we get index, new and create with the /articles/[articleKey]/ part in the URL, but to show, edit, update or delete a comment, we can just fall back to /comments/

Member and Collection Blocks

A member() block is used within a nested resource to create routes which act 'on an object'; A member route will require an ID, because it acts on a member. photos/1/preview is an example of a member route, because it acts on (and displays) a single object.

mapper()
    // Create a route like `photos/1/preview`
    .resources(name="photos", nested=true)
        .member()
            .get("preview")
        .end()
    .end()
.end();

A collection route doesn't require an id because it acts on a collection of objects. photos/search is an example of a collection route, because it acts on (and displays) a collection of objects.

mapper()
    // Create a route like `photos/search`
    .resources(name="photos", nested=true)
        .collection()
            .get("search")
        .end()
    .end()
.end();

Redirection

As of CFWheels 2.1, you can now use a redirect argument on GET, POST, PUT, PATCH, and DELETE requests. This will execute before reaching any controllers, and perform a 302 redirect immediately after the route is matched.

CFScript

mapper()
  .get(name="foo", redirect="https://www.google.com")
  .post(name="foo", redirect="https://www.google.com")
  .put(name="foo", redirect="https://www.google.com")
  .patch(name="foo", redirect="https://www.google.com")
  .delete(name="foo", redirect="https://www.google.com")
.end()

This is useful for the occasional redirect, and saves you having to create a dedicated controller filter or action just to perform a simple task. For large amounts of redirects, you may want to look into adding them at a higher level - e.g in an Apache VirtualHost configuration, as that will be more performant.

Disabling automatic [format] routes

Note

Introduced in CFWheels 2.1

By default, CFWheels will add .[format] routes when using resources(). You may wish to disable this behavior to trim down the number of generated routes for clarity and performance reasons (or you just don't use this feature!).

You can either disable this via mapFormat = false on a per resource basis, or more widely, on a mapper basis:

// For all chained calls
mapper(mapFormat=false)
.resources("users")
.end()

// or just for this resource
mapper()
.resources(mapFormat=false, name="users)
.end()

\