Stop repeating yourself with the use of before and after filters.
If you find the need to run a piece of code before or after several controller actions, then you can use filters to accomplish this without needing to explicitly call the code inside each action in question.
This is similar to using the onRequestStart / onRequestEnd functions in CFML's Application.cfc file, with the difference being that filters tie in better with your CFWheels controller setup.
One common thing you might find yourself doing is authenticating users before allowing them to see your content. Let's use this scenario to show how to use filters properly.
You might start out with something like this:
Sure, that works. But you're already starting to repeat yourself in the code. What if the logic of your application grows bigger? It could end up looking like this:
Ouch! You're now setting yourself up for a maintenance nightmare when you need to update that IP range, the messages given to the user, etc. One day, you are bound to miss updating it in one of the places.
As the smart coder that you are, you re-factor this to another function so your code ends up like this:
Much better! But CFWheels can take this process of avoiding repetition one step further. By placing a filters() call in the config() function of the controller, you can tell CFWheels what function to run before any desired action(s).
Besides the advantage of not having to call restrictAccess() twice, you have also gained two other things:
The developer coding secretStuff() and evenMoreSecretStuff() can now focus on the main tasks of those two actions without having to worry about repetitive logic like authentication.
The config() function is now starting to act like an overview for the entire controller.
All of these advantages will become much more obvious as your applications grow in size and complexity. This was just a simple example to put filters into context.
So far, we've only been dealing with one controller. Unless you're building a very simple website, you'll end up with a lot more.
The question then becomes, "Where do I place the restrictAccess() function so I can call it from any one of my controllers?" The answer is that because all controllers extend Controller.cfc, you should probably put it there. The config() function itself with the call to filters() should remain inside your individual controllers though.
If you actually want to set the same filters to be run for all controllers, you can go ahead and move it to the Controller.cfc file's config() function as well. Keep in mind that if you want to run the config() function in the individual controller and in Controller.cfc, you will need to call super.config() from the config() function of your individual controller.
You specify if you want to run the filter function before or after the controller action with the type argument to the filters() function. It defaults to running it before the action.
The previous example with authentication showed a "before filter" in action. The other type of filter you can run is an "after filter." As you can tell from the name, an after filter executes code after the action has been completed.
This can be used to make some last minute modifications to the HTML before it is sent to the browser (think translation, compression, etc.), for example.
If you want to get a copy of the content that will be rendered to the browser from an after filter, you can use the response() function. To set your changes to the response afterward, use the setResponse() function.
As an example, let's say that you want to translate the content to Gibberish before sending it to your visitor. You can do something like this:
By default, filters apply to all actions in a controller. If that's not what you want, you can tell CFWheels to only run the filter on the actions you specify with the only argument. Or you can tell it to run the filter on all actions except the ones you specify with the except argument.
Here are some examples showing how to setup filtering in your controllers. Remember, these calls go inside the config() function of your controller file.
Sometimes it's useful to be able to pass through arguments to the filters. For one, it can help you reduce the amount of functions you need to write. Here's the easy way to pass through an argument:
Now the byIP argument will be available in the authorize function.
To help you avoid any clashing of argument names, CFWheels also supports passing in the arguments in a struct as well:
Because your controller's config() function only runs once per application start, the passing of arguments can also be written as expressions to be evaluated at runtime. This is helpful if you need for the value to be dynamic from request to request.
For example, this code would only evaluate the value for request.region on the very first request, and CFWheels will store that particular value in memory for all subsequent requests:
To avoid this hard-coding of values from request to request, you can instead pass an expression. (The double pound signs are necessary to escape dynamic values within the string. We only want to store a string representation of the expression to be evaluated.)
Now instead of evaluating request.region inside the config() function, it will be done on each individual request.
You probably don't want anyone to be able to run your filters directly (by modifying a URL on your website for example). To make sure that isn't possible we recommend that you always make them private. As you can see in all examples on this page we make sure that we always have access="private" in the function declaration for the filter.
If you need to access your filters on a lower level, you can do so by using the filterChain() and setFilterChain()functions. Typically, you'll want to call filterChain() to return an array of all the filters set on the current controller, make your desired changes, and save it back using the setFilterChain() function.